ES | Sitemap | RSS | XML

Customer consultation : 13827710288

通用banner

Look at the processing of aluminum profiles

2019-10-12
Times

If we want to process aluminum profiles, do you know how to do it?In short, we can start from two aspects, namely the longitudinal travel, the speed is also relatively high.Will come to tell you about this aluminum profile to process.

Because we want to be very good to adapt to the processing characteristics of aluminum profile, its working area is a lot of narrow long, so its length can not exceed 500 mm, in the work place to have a positioning board and pneumatic tools, so that we can be more convenient to locate the workpiece.There are usually three types of processing structure, moving column, gantry and moving beam.It is very stable and easy to operate.

The speed of its processing center can reach 18000rpm, and you can see that its speed is very high, so we generally use integrated synchronous spindle, he will clamp the tool, but also for cooling cycle.In the cooling system of waite mechanical aluminum profiles, he has spray cooling and pouring cooling, the former is more advanced, his cooling and lubrication effect is also very good, the use of cooling fluid is very few, used for the processing of aluminum profiles particularly good.


label

Recently Viewed:

Home   |   About   丨   Product   丨   Case   丨   News   丨   Inquiry   丨   Contact

© All rights reserved Foshan nanhai tongzheng machinery equipment co. LT
ICP 15042538 Service support:Up to the science and technology

1574905972646069.png

— Mobile station —

Share this site with others: