ES | Sitemap | RSS | XML

Customer consultation : 13827710288

通用banner

What is the tonnage range of the large extruder?

2019-10-12
Times

Large extruder, hear this word, xiaobian found that many of our users are looking for a large tonnage of the extruder, then how much tonnage is the domestic just?Also is not hard to find, if you careful observation will appear in the baidu search some relevant information, such as "sohu net" referred to in the domestic world big heavy horizontal extruder, the extrusion of 23500 tons, in order to you can choose a reasonable extrusion press tonnage, small make up also specially write a short essay, hope can help you!

1. Introduction of extruder tonnage:

The extruder is divided according to the tonnage, and the English letter t replaces the tonnage. Of course, the profile specification produced by each tonnage is also different. Here we introduce the tonnage produced by wuxi yimei machinery co., LTD. :500 t can produce a few broken bridge aluminum material products, the 600 t aluminum extrusion by rod specifications within 90 mm, with 800 tons, or 1000 t in the production of aluminum alloy doors and Windows products customers more seamless extrusion, 1350 t, 1250 t aluminum tube solar frame extrusion machine, 1650 t, 1850 t aluminum extrusion machine, extrusion aluminium rods specification corresponds to 203 mm, 2500 t aluminum rods specification in 254 mm, 3600 t can produce products of industrial profiles, and, of course, some of the larger tonnage, such as 4000 t, 5000 t, 6000 t aluminum extrusion machine and so on.As the tonnage model is too much, we will probably introduce some of the common tons, specific or according to the customer to provide profile profile profile size and wall thickness to decide how much of the extrusion machine tonnage

2. How to calculate the tonnage of extrusion?

There is a calculation formula for the tonnage required for extrusion, which is:

Squeeze tonnage = rated pressure * plunger area

It should be noted here that the extrusion tonnage can also be said to be the nominal pressure, the rated pressure is the main pump overflow valve pressure.In addition, if there is a side cylinder, then there is also a side cylinder pressure, can not miss.

3. What is the range of large-tonnage aluminum extruders?What products are most used to produce?

What is the big tonnage, more than ten thousand tons of extrusion machine in domestic can also call it the big scope, but the big tonnage extrusion production factory house is not a lot, my company production extruder tonnage from 500 tons to 6000 tons, more than 40 specifications, introduced in the beginning we large-tonnage extruder can reach 23500 tons, the extrusion pressure that this kind of large tonnage extruder during production of commonly used aluminum is used, then it is used to produce what product?We continue to introduce, in the sohu network learned, this big guy, is equivalent to the pull of 84 airbus A380, big guy has great wisdom, with it, large aircraft, high-speed rail on the super-large components are no longer.


label

Recently Viewed:

Home   |   About   丨   Product   丨   Case   丨   News   丨   Inquiry   丨   Contact

© All rights reserved Foshan nanhai tongzheng machinery equipment co. LT
ICP 15042538 Service support:Up to the science and technology

1574905972646069.png

— Mobile station —

Share this site with others: